Carb & Choke Cleaner Spray (CB-1)

Description

CB – 1 is used in eliminating dirt and deposits in the air intake manifold, the throttle valve and on the visible carburetor parts without the need for disassembly.

• How to use

1. Make sure the engine is OFF and completely cool
2. Shake the can well before use
3. Remove the air filter to access the carburetor
4. Spray directly onto the carburetor and choke valve
5. Let the cleaner sit for a few minutes to break down deposits
6. Wipe with a cloth or use a soft brush if needed
7. Start the engine and let it run for a few minutes

• Number of sprays

• Use short bursts (1–2 seconds each)
• Apply about 3–6 sprays per component
• Repeat if the parts are heavily dirty
• Avoid continuous spraying

• Places of use

• Carburetor
• Choke valve
• Air intake components
• Unpainted metal engine parts

Do NOT use on:

• Plastic or rubber parts
• Painted surfaces
• Interior or exterior car body

• Usage tips

• Use in a well-ventilated area
• Keep away from heat, sparks, and flames (highly flammable)
• Wear protective gloves and safety glasses
• Never spray on a hot or running engine
• Apply lightly—do not oversaturate
• If engine struggles after spraying, pause and restart